Viewfinder dial & selector – Canon V User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment of the Viewfinder Dial (15) is made
by turning the Viewfinder Selector (16).
Position “35” shows you the view which any
Canon 35mm lens will record.
Position “50” gives you what any Canon 50mm
lens will record.
You can focus the Rangefinder at any of the three
positions.
VIEWFINDER DIAL & SELECTOR
For long focal length lenses (i.e. greater than
50mm) or when a larger image is desired for focus
ing, set the selector at “RF”. For lenses other than
35mm and 50mm an accessory Viewfinder is neces
sary to give you correct composition. Alternatively,
a Canon Zoom Finder or Erect Image Finder may
be used. In all cases, the Automatic Parallax Adjust
ment Pin (27) built into the Accessory Clip (22)
will elevate or depress the viewer to correspond to
the focus of your lens from 3.5 feet to infinity.
17