Canon VI-T User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If
1. Turn the Film Rewind Ring (8) from “A” to the Film Rewind
Mark ( I ) .
2. Raise the Rewind Crank (13) into operating position as illustrated
above. Turn it clockwise, as shown by the arrow, until all the film
has been wound back into the original cartridge. Tension on the
Film Rewind Crank will cease as soon as this has been done and
the Film Transport Indicator (19) will also stop rotating. As long
as the Film Transport Indicator rotates clockwise, film is being
rewound in the camera. One complete turn indicates one frame
rewound.
3. Open the camera back.
4. Pull out the Rewind Crank (13) and take out the film cartridge.
o