Check that the frame counter shows “0, Open the back cover, To remove the film before you reach the end – Canon ZOOM76 User Manual
Page 21: B-23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The film rewinds automatically when it reaches the
end. The frame counter counts down as the film
rewinds and the frame counter shows “0” when the film
is fully rewound.
[7] Removing the Film
1
Check that the frame
counter shows “0”.
Open the back cover.
• Push the lever down and
remove the film.
To remove the film before you reach the end
• Press the Qu button on the
bottom of the camera
• Hold the button down until the
film starts to rewind.
u
■ Always check that the frame counter on the LCD
panel has returned to “0" before you open the back
cover. If the counter is not at “0", use the button push
projection on the camera strap (-> 11) to push the
Qu button
• If you shoot more than the stipulated number of
exposures on a roll of film, the final shot may be lost
during developing and processing, or the date and
time may not be imprinted on the final shot,
B-23