Using the built-in flash – Canon Snappy 50/20 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using the Built-in Flash
Switch to flash photography if the view
finder lamp blinks rapidly when you
press the shutter button halfway. Use of
the flash will prevent blurred and overly
dark photos.
1 Push the flash switch out in the
direction of the arrow.
2 Wait for the flash-ready lamp ® to
glow; then shoot.
Notes
Do not continuously press the shutter but
ton halfway while waiting for the fiash-
ready iamp to glow; the flash will not
charge.
If you take the shot before the flash-ready
lamp glows, exposure will not be correct.
The flash cannot be used to "fill in"
shadows in daylight photography.
15
Advertising