Canon EOS 1 N - Manual (Page 27)

Program AE mode [P]
[Exposure Warnings]_____________________________________
If a shutter speed of 30” and the maximum aperture value blink in the display, the sub­
ject is too dark. Switch to flash photography, referring to “V. Using Flash” on page 76.
If a shutter speed of 8000 and the minimum aperture value blink in the display, the
subject is too bright. Attach a neutral density (ND) filter to the lens.
# Six-Second Timer
When you release the shutter button after pressing it halfway, the LCD
panel and viewfinder displays remain active for six seconds.
• Program Shift Function
When taking pictures in Program AE mode, you can “shift the program” to
change the set shutter speed and aperture value combination while main­
taining the same exposure.
After pressing the shutter button halfway, turn the main dial until the
desired shutter speed/aperture value combination is displayed.
• Remaining Frame Counter
When nine frames or less remain on the roll, the number of
remaining frames is displayed in the viewfinder below the expo­
sure level display. “F” indicates that 10 or more frames remain on
the roll. When less than 10 frames remain, the display counts
down the frames in descending order: 9, 8 ... 2, 1.
• Non-DX films are identified as 36-exposure rolls, and the remaining
frame counter operates accordingly.
Remaining frame counter
27