Set to playback mode, Select an image to erase, Erase the image – Canon A1000 IS User Manual
Page 11: Erasing images
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
You can select and erase images one at a time Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image
Erasing Images
Set to Playback mode.
Press the H button.
The last image you shoot will appear.
Select an image to erase.
Press the buttons to select an image
to erase.
Erase the image.
Press the ▼ button
Press the buttons to select [Erase],
then press the @ button
The displayed image will be erased.
To exit instead of erasing, press the 4k
buttons to select [Cancel], then press the
® button.
19
Advertising