Christie Digital Systems 38-DHD103-XX - Manual

Stacking Frame Installation Instructions
013-100342-01 (Rev.1) (08/06) 1 of 12 pages
Introduction
Use the following instructions when installing stacking frames onto the models listed in
Table 1. Only use the stacking frame provided by Christie (104-117101-01) to hoist or
stack a maximum of three projectors. The stacking frame can also be connected to the
integral rigging points on any Roadster/Mirage S+ and Roadster HD12k projectors. For
information on the rigging hardware of these models, refer to section 2.2 Installation
Considerations in the Roadster S+/HD & Mirage S+ User’s Manual.
Table 1. Projector Models
Projector Model Model Number
Christie DS+4K 38-DSP104-xx
Christie DS+5K/Kc 38-DSP104-xx/38-DSP104-5x
Christie DS+8K 38-DSP106-xx/38-DSP106-5x
DLV1920-DX 104-017101-xx
DLV1400-DX 38-DSP102-xx
Christie DW3K/Kc 38-DHD103-xx/38-DHD103-5x
Christie DW6K/Kc 38-DHD106-xx/38-DHD106-5x
Christie HD5K 104-006101-xx
Christie HD5Kc 104-007101-xx
Christie HD8K 104-008101-xx
Christie HD8Kc 104-018101-xx
Mirage S+2K 38-DSP102-xx/38-DSP102-5x
Mirage S+4K 38-DSP104-xx/38-DSP104-5x
Mirage S+8K 38-DSP106-XX/38-DSP106-5X
Mirage W3 104-012101-xx
Mirage W6 104-013101-xx
Mirage W8 104-014101-xx
Matrix 4000 38-DSP104--xx
Matrix W4 104-016101-xx
OFFICIALLY RELEASED
Document Control
September 8, 2006