Canon EOS 600 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MANUAL FILM SPEED SETTING
The camera automatically sets film speed by sensing the DX code marked on the film cartridge
(ISO 25-5000 according to the DX code ) The automatically-set film speed will appear in the display panel
while the film advances to the first usable frame When using film without a DX code, set the speed manually
by following these steps: (ISO 6-6400)
Set the main switch to either 2)
“A" or “((•))■’
Open the switch cover, and
press both the blue and yellow
buttons at the same time to
display the ISO film speed
number
3) Turn the electronic input dial
until your film speed appears
• The previously-set film speed
blinks if the film speed has not
been set. The warning stops
after correct film speed set
ting.
13