Notes – Canon 244 T User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
E
6. Set the main switch to OFF when
flash photography is finished.
Notes
1. if the subject is too far from the
flash, the green "P" will blink rapid
ly (8 times per sec) to warn you.
(The "t" remains solid.) Move
closer to the subject until the "P"
stops blinking Once you have
found a suitable shooting position,
be sure to remove your finger from
the shutter button* and re-focus
the subject. Then you can take the
picture.
* If you do not remove your
finger from the shutter button
after changing your position,
exposure will be incorrect,
since exposure is set each
time the shutter button is
pressed halfway.
Advertising