Canon A-1 User Manual
Page 145
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
when
using
a
macrophoto
coupler,
the
Macro Hood must also be mounted onto
the rear of the lens.
You may avoid setting the lens for manual
diaphragm
control
when
using
manual
accessories or a macrophoto coupler by
attaching the Canon Macro Auto Ring and/
or Double Cable Release.
Be sure to reset the automatic aperture lever
to its normal position before using the lens
once more in cUrect contact with the camera.
In the case of a lens with a lock lever, switch
it back to the position of the white dot.
To meter when the lens is set for manual
diaphragm control, use the stopped-down
AE procedure.
81
-
Advertising