Canon T2000 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the microphone
The microphone supplied
with your projector is of
the omnidirectional type.
In other words, it will pick
up most of the sound
around it. Care should
therefore be taken not to
hold the microphone too
close to the projector, or
running noise may be
picked up.
on the cord during record
ing. Remember that even
slight tapping against the
microphone, pulling on its
cord or rubbing will be
recorded as disturbing
noise. Also keep the input
selector (14) in its left-
hand position (Micro) to
avoid feedback.
Hold the microphone at a
constant distance of about
4 inches or 10 cm from
your mouth and speak at a
constant level. Wind the
microphone cord once
around your hand in a
loop to prevent any pulling