Eyepiece adjustmefvst – Canon Super 8 814 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The white button is for checking the mercury bat
teries, and the red button is tor the penliKht
batteries. Set the three-way switch at "R”, press
a button and check the position of the needle
seen in the battery tester window If the needle
is in the blue zone, the batteries have sufficient
power level. Otherwise, replace the batteries
i>lf the needle points to th^ white zone,_the^
penlight batteries have power level for 12 and
18 fps only
EYEPIECE ADJUSTMEfVST
Loosen the eyepiece adjustment ring by turning
it to the left. Aim the camera in the direction
of a bright subject and then look into the view
finder. Turn the Rveniece and adjust it so that
the aperture scale and the lines of the prism
screen can be clearly seen. Then tighten the
[ eyepiece adjustment ring
12 and ISfps only
14