Removing the film, Rewinding the film in mid-roll, Loading the film – Canon Z155 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Loading and Removing the Film
Removing the Film
The film rewinds automatically when it reaches the end.
When the film is fully rewound, the frame counter
shows “0” and the
h
blinks.
Check that the frame
counter shows “0”.
• If the
©
is not blinking,
press the tt© button.
Open the back cover.
• Push the back cover
release lever down and
remove the film.
Rewinding the Film in Mid-roll
‘ Use the strap buckle pin on the
strap buckle (-> 7) to press the
it©
button on the back of the
camera.
• Hold the button down until the
film starts to rewind.
[Ej-13
Advertising