Corsair Obsidian 800D - Manual (Page 8)

Obsidian Series 800D USER MANUAL
8
Step 2 - Once the panel is securely latched to the bottom of the case, tilt the side panel
back up into the case while holding the corresponding release button. When the side panel
is flush, release the button and the side panel will lock into place.
2.2. How to remove and re-install the front panel
2.2.1. Removing the front panel
Standing in front of the case, reach under the bottom of the front panel and, using firm
pressure, pull upwards and forwards. The front panel is not held in place with any screws
or wires, but must be removed in order to access the lower drive bay or remove 5.25” bay
covers
Grasp here. Pull
firmly but carefully .