Prewashing, pre-wash, Rinse, drain and spin only, rinse+spin, Adding extra rinse cycle, extra rinse – LG WM2650HWA User Manual
Page 27: Presetting the start time, delay wash, Efficiency cleaning, steam, A warning, O note, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26 USING YOUR WASHING MACHINE
Prewashing, PRE-WASH
Pre-wash for 16 minutes when clothes are covered in dirt or
dust. This feature is suitable for heavily soiled items.
1 Press and turn (O) to toe desired cycle.
light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press
(
hi
).
Rinse, drain and spin only, RINSE+SPIN
Use this cycle to rinse detergent from load.
1 Press and turn (O) to the desired cycle.
2 Press
O RINSE+SPIN
3 Press the desired option button to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press
(
hi
).
Adding extra rinse cycle, EXTRA RINSE
You can add an extra rinse cycle to the default rinse cycle.
1 Press (^ and turn (O) to the desired cycle.
2 Press
O EXTRA RINSE
Q EXTRA RINSE
light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press (^.
Adding extra water to the washing and
rinse cycle, WATER PLUS
You can rinse the load more thoroughly by adding extra water
to the washing and rinse cycle.
1 Press (Q^ and turn (O) to the desired cycle.
2 Press
o i
SIGNAL OM/OFF
• SIGNAL ONOFF
light will turn on.
4
Press the desired option button to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
Press (^
Presetting the start time, DELAY WASH
You can set the desired start time.
1 Press (^ and turn to the desired cycle.
2 Press the desired option to use the other options.
repeatedly to select the desired start
Press
time.
O DELAY WASH
O DELAY WASH
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 19 hours.
4 Press (^.
Efficiency cleaning, STEAM
Adding the Steam option to these cycles provides superior
cleaning performance while reducing energy and water
consumption.
By using a hot steam spray from above and cooler water
below, fabrics get the cleaning benefits of a super hot wash,
without the energy usage or potential damage to fabrics.
1 Press (Q^ and turn (O) to the desired cycle.
O
2 Press The washer will automatically adjust the cycle
settings.
3 Set any other desired options.
4 Press (^.
-A
WARNING-------------------------------------
• Do not touch the door during steam cycles. The door
surface can become very hot. Allow the door lock to
release before opening the door.
• Do not attempt to override the door lock mechanism
or reach into the washer during a steam cycle. Steam
can cause severe burns.
O NOTE------------------------------------------
• The steam option cannot be used with all cycles.
• Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could damage
clothing.
• Do not use steam with delicate fabrics such as wool,
silk, or easily discolored fabrics.