LG LMX28G83 - Manual (Page 9)

FLOORING
INSTALLATION
' To minimize noise and vibration, the refrigerator
MUST be installed on a solidly constructed
floor.
' To avoid vibration, the unit must be level. If
required, adjust the leveling legs to compensate
for unevenness of the floor. The front should be
slightly higher than the rear to aid in door
closing. The leveling legs can be turned easily
by pushing against the top of the refrigerator to
take the weight off the feet. Turn the leveling
legs clockwise to raise the unit or
counterclockwise to lower it.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the refrigerator on a platform or
weakly supported structure.
NOTE: When moving the refrigerator for cleaning
or service, be sure to protect the floor. Always
pull the refrigerator straight out when moving it.
Do not wiggle or walk the refrigerator when trying
to move it; floor damage could occur.
NOTE: It is recommend that the doors be removed when it is necessary to move the refrigerator through a
narrow opening.
HANDLE REMOVAL
To move the refrigerator through a house door, it may
be necessary to remove the refrigerator
door handles.
NOTE: Handle appearance may vary from
illustrations on this page.
ACAUTION
' Use special care when removing handles to
prevent scratching the doors.
' The handle could be damaged if you hit it with
a hammer while removing or attaching.
' When you assemble or disassemble a handle,
you must push or pull with reasonable force.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4" Allen
wrench. NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4" Allen
wrench.