ClearSounds CL1 - Manual (Page 4)

Installation
1. Plug the AC power adapter into the 12V DC Jack on the back of
the CL1 and then into your wall outlet.
2. Plug one side of the phone cord (included) into the LINE IN jack
on the back of the CL1 and the other side into your wall jack.
3. Plug your telephone into the LINE OUT jack on the back of the
CL1. NOTE: The CL1 can operate independently without the
telephone. Simply follow steps 1 & 2.
4. At your option, plug the Optional Bed Shaker into the shaker
jack on the back of the CL1 & place the shaker under your pillow
or mattress
Your CL1 is ready for use. Now you simply need to adjust the
settings to fit your needs.
CS-CL1manual.pm 2/5/04, 20:09 4