Operation, Basic operations, English – Clarion TB743W User Manual

Page 10: Caution

Advertising
background image

English

Owner

’s manual

10

TB741P/TB742P/TB743W

7. OPERATION

Basic Operations

Note: Be sure to read this chapter referring to the front

diagrams of chapter “1. CONTROL” on page 3 (spread).

To prevent the battery from running down,
operate the unit while the engine is running
whenever possible.
When listening to the sound of TV programs
while driving, use a volume setting at which
you will still be able to hear sounds outside
the vehicle.
When the liquid crystal panel is operating,
be careful not to get your hand or finger
caught between the panel and main unit or
the instrument panel of the car.

Note:
• Use this unit after starting the engine.

CAUTION

ACC or engine
ON position

Turning on and off the power

Note:
• Be careful about using this unit for a long time

without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.

1. Press the [PWR] button.
2. The illumination and display on the unit light

up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.

3. Press the [PWR] button to turn off the power

for the unit.

20˚

20˚

Standing up the liquid crystal panel

1. Press the [OPEN/CLOSE] button and the

liquid crystal panel comes out and stand up
automatically.

∗ While the liquid crystal panel is opening or

closing, the LED of the [RESET] button blinks.

Note:
• If the liquid crystal panel stops in the middle of its

operation, press the [OPEN/CLOSE] button to
house the panel and press the button again to
stand it up. The unit enters the same display
mode as the display was turned off the last time.

Adjusting the angel, etc. of the
liquid crystal panel

The angle of the liquid crystal panel or
protruding amount of the panel from the
mounting surface can be adjusted depending
on the mounting angle of the unit or light
coming into the car.
To adjust the angle
1. Every time the [TILT] button is pressed, the

liquid crystal panel tilts forward or backward
at up to about 20 degrees. The adjusted
angel is stored in memory.

Advertising
This manual is related to the following products: