Acolyte RibbonLyte for In-Wall Channel - Manual (Page 4)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P S 5 - 7
5
7 6
PA G E 3
Apply the RibbonLyte (E) atop the double-sided tape
inside the channel, making sure the RibbonLyte sits
completely flat.
(A)
(E)
(F)
Slide the lens (F) into place. Rout or cut a slot in your desired installation
material that fits the width and depth of
your channel (A). Drill a pilot hole for screws
that align with the hole of the spring clip.