Acolyte DMX Advance - Manual (Page 11)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
PA G E 1 0
O P E R AT I N G I N S T R U C T I O N S - P R E S E T C O L O R M O D E S ( 1 - 2 7 )
4
5
Use the Mode+ and Mode- buttons to cycle through the four submenu options:
Running Time Adjustment:
Default Set Recovery:
Adjust the speed multiple:
RGB Fine-Tune:
Does not work on Preset Color modes (1-27)
Press either the BRT+ or BRT- button to restore the
default settings for the current mode
Press the BRT+ button to increase and the BRT-
button to decrease the speed multiple. Setting
a higher multiple increases the total cycle time
making the color change slower.
Press the Speed+ and Speed- to move between
the R, G and B values and use the BRT+ and BRT-
buttons to increase/decrease the brightness in the
corresponding channel. This setting allows you to
fine-tune the colors in a Preset Color mode. Values
range from 127-255.
Press the setup key to return to the main screen of the Preset Color mode.
RUN TIMES : 003
000=NOT RUNNING
LOAD DEFAULT SET
PRESS BRT + - KEY
SPEED MULTIPLE:
001
RGB BRIGHT ADJ
R255 G255 B255