Alumax P-DRA1Y - Manual (Page 10)

10
Ensure that the running rail (1) is at the
highest possible position in reference to the
holes of the fixed panel (7). Adjust the fixed
panel (7), by way of the running rail (1), so
as to force the gasket (10) against the wall.
The distance between the fixed panel and
wall should therefore be 3/16”.
Mark the bottom glass clip (11) and
bottom guide (12) locations on the base.
Mark the locations for the wall brackets (2)
on the walls on both sides of shower.
Ensure that their horizontal positioning is
as illustrated.
1
4B
CONTINUED
ENSURE THAT THE FIXED
PANEL AS WELL AS THE
RUNNING RAIL ARE LEVEL
DURING THESE PROCEDURES.
VERTICAL ALIGNMENT
OF PANEL
5/16”
(8mm)
CENTER OF BASE THRESHOLD
1
7
7
10
3/16’’
2
12
11
WASHER
GLASS
HOLE
1
4