Determine hinges location, 1b 1c – Alumax M-90X User Manual
Page 7
Advertising
7
INSTRUCTION MANUAL
DETERMINE HINGES LOCATION.
1
1A. Determine on which side the hinges will be mounted.
1B. Trace a centerline on the threshold and run it up along the wall.
1C.
Place the wall jamb (#1) on the threshold by centering the slotted
holes with the centerline.
1D.
Mark the drilling locations at the top and bottom of the wall jamb.
Drill a hole at each location with a 1/4” drill bit.
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
1B
1C
1
1D
USE THE WALL JAMB (#1) AS TEMPLATE
TO MARK DRILLING LOCATIONS FOR
WALL-MOUNTED HINGES.
WALL-MOUNTED HINGES MUST BE SUPPORTED
AND FASTENED INTO A STUD FRAMING.
Advertising