Casablanca Fan Company CD50 - Manual (Page 11)

11
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
RADIO OPERATION
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮
press CD•C
@
repeatedly until
“RADIO” appears in the display.
RDS function
This car audio system has been
equipped with an RDS radio receiver.
Many FM radio stations now transmit a
signal which contains such other infor-
mation as the station name along with
their regular programming. As soon as
the radio station name is detected, it will
appear in the display. The RDS func-
tion can be switched on or off.
Switching the RDS function on/off
➮
To take advantage of the RDS
function, press RDS
4
.
When the RDS function has been acti-
vated, the RDS symbol will light up in
the display.
Selecting the waveband/
memory bank
The car audio system is able to receive
FM and AM radio programs. There are
three memory banks for the FM wave-
band and one memory bank for the AM
waveband.
Up to six radio stations can be stored
on each of the memory banks.
➮
To switch between the FM memory
banks, press FM / TS
5
.
➮
To select the AM waveband, press
AM
?
.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮
Press or
:
.
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
➮
Press or
:
.
Note:
You cannot use manual tuning unless
the RDS function is deactivated.
Paging through the broadcasting
network (for FM only)
If a radio broadcasting network has
more than one station, you can page
through the “station network”.
➮
Press or
:
to tune into the
next station in the network.
Note:
To take advantage of this function, you
must have activated the RDS function.
It is only possible to tune into those sta-
tions which have been received once
before already. To do this, use the SCAN
or TravelStore function.
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.