Alumax K-KR4Z - Manual (Page 10)

PAGE 7
5A
5B
6B
6C
6A
- REALIGN WALL JAMB WITH REFERENCE LINE (2).
- MARK DRILLING LOCATION FOLLOWING PILOT HOLES.
- DRILL HOLES BY USING SUITABLE 1/4” DRILL BIT.
5
Step
- INSERT THE WALL PLUGS (8)
AND PUT IN EACH A DROP OF SILICONE.
- SECURE THE WALL JAMB USING 1 3/8” SCREWS (8)
Step
6
DOOR INSTALLATION STEPS