Alumax ABR Series - Manual (Page 2)

2
06.10 K
ABR32-ABR36-ABR40
● Table of Contents
IMPORTANT .................................................... 2
CARE FOR YOUR ACRYLIC SHOWER BASE .................. 2
SPECIFICATION. ............................................... 3
TOOLS AND MATERIALS REQUIRED. ........................ 3
1. PREPARE DRAINING PIPE. ................................. 4
2. INSTALL THE DRAIN. ...................................... 4
3. LEVELING THE BASE. ..................................... 5
4. TESTING THE DRAINAGE. ................................. 5
5. FASTEN THE BASE. ........................................ 6
6. FINISHING. .................................................. 6
- Read this manual carefully and completely before
proceeding.
- It is recommended that you wear safety glasses at all
times during the installation.
- Prior to installation of base, all framing and
plumbing work must be completed in accordance
with this instruction sheet.
For renovation work, existing shower surfaces must be
removed to accommodate framing requirements.
Ensure that outer wall are properly insulated, and that
a vapor barrier has been installed in accordance with
established building codes.
● Care for your Acrylic Shower Base
- In order to protect the acrylic surface of your base,
never use scouring powder pads or other strong solvents.
Only clean it with a mild detergent diluted in water or a
dertergent formulated for acrylic.
● IMPORTANT
without notice. Use the installation instructions
supplied with the product.