Slide number 3 – Astak G660 DashPro2Channel - Quick Start Guide User Manual
Page 3
Advertising
Make sure to check local traffic laws and regulations before using. Attach CarCam in a place where the driver’s view is not blocked.
•
Position: recommended area of installation
•
After attaching the CarCam to the recommended installation area, use
the product handles to adjust the camera so that it is horizontal and
facing the front.
•
Once power is on, the product LED will turn on and "Start recording”
voice guidance is provided and recording will start.
Position of Installation
Caution upon Installation
Installation
•
Please don’t move CarCam once installed. Change the double sided tape if CarCam need to be re-attached.
•
Do not install or use CarCam outside of the vehicle.
Advertising