Cisco 7206VXR NPE-400 - Manual (Page 4)

4
FIPS 140-2 Nonproprietary Security Policy for Cisco 7206VXR NPE-400 Router with VAM
OL-3959-01
Module Interfaces
Table 1 shows the front panel LEDs, which provide overall status of the router operation. The front panel
displays whether or not the router is booted, if the redundant power is attached and operational, and
overall activity/link status.
Figure 2 Cisco 7206VXR Router Front Panel LEDs
LED Indication Description
Enabled Green Indicates that the network processing engine or network
services engine and the I/O controller are enabled for
operation by the system; however, it does not mean that
the Fast Ethernet port on the I/O controller is functional or
enabled. This LED goes on during a successful router boot
and remains on during normal operation of the router.
IO POWER OK Amber Indicates that the I/O controller is on and receiving DC
power from the router midplane. This LED comes on
during a successful router boot and remains on during
normal operation of the router.
Off Power off or failed
Slot 0
Slot 1
Green These LEDs indicate which PC Card slot is in use by
coming on when either slot is being accessed by the
system. These LEDs remain off during normal operation
of the router.
DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER
CONSOLE
AUX
100 Mbps
LINK
100 Mbps
LINK
SLOT 0 EJECT PCMCIA
SLOT 1
ENABLED
CPU
RESET
IO PW R
O K
33444
CPU
RESET
IO PWR
OK
100 Mbps
LINK
SLOT 0
SLOT 1
C7200-I/O-2FE/E
ENABLED
FE/E 0 FE/E 1