AVer F50 user manual - Manual (Page 12)

ENGLISH
7
Name Function
(2)
RM- NM
(11)
(6)
(17)
(22)
(21)
(19)
(20)
(23)
(26)
(1)
(9)
(13)
(15)
(5)
(24)
(25)
(7)
(4)
(3)
(8)
(10)
(12)
(16)
(14) (18)
(fig. 1.6)
(5) VISOR Call the Visor submenu. Visor covers
part of the presentation screen and allow
presenter to reveal the material as
desire.
In the Visor submenu, the following
options are available.
ON/OFF – select to run/cancel the Visor.
Press to move to the next selection.
Shade – set the opacity level of the
covered area. The shaded area will
completely turns black when it is set to
level 100. Press to move to the next
selection.
OK – press for the setting to take
effect. If you select ON, upper part of the
presentation screen is slightly exposed.
Use the ▲,▼,◄, & ► buttons to reveal
more of the covered area; and OFF will
close the submenu.
To turn off Visor, press
again.
(6) SPLIT
SCREEN
Divide the screen into two. One side
displays the live image from the built-in
camera and the other side displays 8-
thumbnail size picture/video from the
memory.
(7) PIP Show a thumbnail size captured
picture/video from the memory at the
corner of the screen in Camera mode.
(8) SLIDE SHOW Start/Stop automatically showing the
captured picture/video one-by-one.
(9) TIMER Call the Timer submenu. Select to
Start/Pause/Stop the timer countdown
and set the timer duration.