AVer 315AF user manual - Manual (Page 29)

ENGLISH
23
Menu Screen Function
In the Visor submenu, the following options are available.
ON/OFF – select to run/cancel the Visor. Press to
move to the next selection.
Shade
– set the opacity level of the covered area. The
shaded area will completely turns black when it is set to
level 100. Press to move to the next selection.
OK
– press
for the setting to take effect. If you
select ON, upper part of the presentation screen is slightly
exposed. Use the
▲, ▼, ◄, & ► buttons to reveal more
of the covered area; and OFF will close the submenu.
PIP
Select the thumbnail playback screen location and show
the thumbnail playback screen at the corner of the
screen to recall the captured image from the memory in
Camera mode. Select OFF to cancel PIP.
Lower Left
Upper Left
Upper Right
Lower Right
Split Screen
Divide the screen into two parts. Half of the screen
displays the 8-thumbnail images and the other half
display the image from the AVerVision315AF camera.
Select the display location of the 8- thumbnail playback
images. Select OFF to cancel Split Screen.
Left Right
Top Below