Crimestopper Security Products CS-2011RS SERIES IV - Manual (Page 23)

PROGRAMMING DIAGRAM
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
(BLUE WIRE GROUNDED)
CS2015FM/TW1
CS2011RS
IGN
OFF
PRESS TOGETHER
START
ALARM TRIGGER DIAGNOSTICS
The CS-2011RS and CS-2015FM systems include disarm diagnostics, through the LED light, that will help in
determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the vehicle
was tampered with or if there is a false alarm problem in which case you can make the necessary adjustments to
correct the problem.
When the system is disarmed with the remote you will hear the normal 2 chirps, then 4 quick chirps that indicate the
alarm was triggered while you were away. Check the LED light for a sequence of flashes:
Shock Sensor Violation = 1 Flash Door Violation = 2 Flashes
Hood/Trunk = 3 Flashes Ignition Violation = 4 Flashes
Diagnostics will reset when the Ignition is turned on or when the system is re-armed.
23