AVer 300AF quick guide - Manual

AVerVision
300AF
Quick Guide
1.
Connect the Power.
VGA OUT VGA IN DC12V LIGHT BOX Power adapter
Power cord
Wall outlet
2.
Select the video display output.
TV RGB
VIDEO S-VIDEO DVI
TV RGB
VIDEO S-VIDEO DVI
Switch AVerVision Port Device
a. RGB
VGA OUT LCD/DLP projector
b. TV
S-VIDEO
Television
a. RGB Connection
VGA OUT VGA IN DC12V LIGHT BOX
LCD/DLP projector RGB cable
(VGA Cable)
b. TV Connection
TV RGB
VIDEO S-VIDEO DVI
TV RGB
VIDEO S-VIDEO DVI
S-Video cable
S-Video to SCART cable
S-VIDEO
SCART
I N P U T
Te l e v i s i o n
3.
Connect a desktop or portable computer (discretional).
- Make sure to connect the other end of the RGB cable to
the VGA(RGB) output port of the computer.
- Press button to display image from VGA IN port of
AVerVision 300AF.
- For portable computer, make sure to switch your
computer to send signal to external output. Usually the
keyboard command is Fn+F5. If not, please check with
your computer handbook or contact the technical support
of your computer manufacturer.
VGA OUT VGA IN DC12V LIGHT BOX
RGB Cable
Desktop Computer
Portable Computer
4.
Basis Operation
z Press the zoom
and to
zoom in and zoom
out the image.
z
Press to
adjust the focus
automatically.
z
Press to
capture and save
the image in the
built-in memory.