AVer SPB350 user manual - Manual (Page 14)

10
Name Function
(6) Source Switch between Camera, Playback and PC mode. To skip Playback and
immediately switch to PC mode, press the SOURCE button twice
consecutively.
- Camera mode displays the video signal from the built-in camera.
- Playback mode displays the captured image from the memory source in
16-thumbnail images. Use ▲,▼,◄, & ► buttons or rotate the shuttle
wheel to make a selection and ENTER to display the selected image in full
screen.
Press MENU to display the Playback menu. Select SLIDE SHOW to start
or set the time interval between frames in second, MEMORY SOURCE to
select the image location between the built-in memory or SD card, and
DELETE to permanently remove the selected image from the selected
memory source.
- PC mode displays the video signal from the RGB IN port of SPB350.
(7) CAP/DEL - Capture a still image in Camera mode. The captured image is saved in the
selected memory source at 1600 x 1200 resolution and the built-in memory
can store up to 80 images.
- Remove the selected picture from the selected memory source
permanently in Playback mode.
(8) ROTATE Turn the image by 90°in Camera mode and 180 in full screen Playback mode.
(9) TIMER Display the OSD timer menu and use ▲or▼ buttons to select SET TIME to
set the time value, START to begin the countdown timer, PAUSE/RESUME
to temporarily halt or continue, and STOP to end. Press MENU to hide the
timer menu.
(10) PROFILE Recall and switch from the 3 saved user setting profile selections (See MENU
Functions – SAVE for more details).
(11) PIP Display/hide a thumbnail of the captured image from the memory source at
the corner of the screen while in Camera mode.
Use ◄ or ► buttons to move to the previous or next image and ENTER to
display the image in full screen. To move the mini playback screen to different
corners, press MENU, go to PIP and select the position of the mini playback
screen.
(12) PRESENTER Select to turn on/off AVerBox or AVerVisor. Only one feature can be used at
a time.
AVerBox overlays a frame on the presentation screen. Selecting SHADE
changes the opacity of the area outside the box from 0%, 50% and 100%,
COLOR to change the frame color from red, green and blue, and RESIZE to
change the size of the frame. To resize or move the frame around the
presentation screen, press the shuttle wheel ▲,▼,◄, & ►.
AVerVisor covers part of the presentation screen. The upper part of the
presentation screen is slightly exposed when it is being called each time. To
expose part of the covered area, press the shuttle wheel ▲,▼,◄, &►. Select
SHADE to change the darkness of the shaded area between 50% or 100%.
(13) MENU Pull up and exit the OSD main-menu and sub-menu.