6 trigger the alarm button, Chapter 2.6 – AVer System Contrll Pro User Manual (NV version) User Manual
Page 29
Advertising
23
2.6 Trigger the Alarm Button
The panic button (
) allows user to trigger the defined alarm button manually.
1.
Press
button and the Alarm Button screen will appear on the LCD screen.
2.
Press the number of alarm button to trigger the alarm. When the
“Complete” message
appears on the LCD screen, the alarm is triggered.
3.
If the
“Failure” message appears on the LCD screen, please make sure the alarm button has
been defined. Please refer to the NV user
’s manual for Alarm Button’s configuration.
Advertising