Setup the time stamp, 1 setup the time stamp – AVer EB3004 NET & NET+ User Manual
Page 25
19
2.3.1 Setup the Time Stamp
By enabling TIME STAMP function, current date and time will be displayed on each channel screen to
verify the recording date and time. Please follow the below steps to enable TIME STAMP.
1. Press
to call out OSD menu.
2. Using
and
to move the highlight to CAMERA/RECORD and press
to
make a selection.
3. Select GENERAL and press
to make a selection.
4. And then, select TIME STAMP by pressing
button.
5. Using
and
to select the disable/enable of TIME STAMP and press
or
to confirm.
GENERAL SETUP
RECORD MODE
TIME STAMP
DVR NAME
WATERMARK
PRE RECORD
AUTO RECORD
CIF
COMPANY
00 SEC
6. Press
to exit from OSD menu.
7. The current date and time will display on upper right corner of each channel screen and will be
recorded.