AVer EXR5016_series user manual - Manual (Page 71)

63
Automatically switch to record at the maximum frame rate setting once a motion is detected and recording
time will be based on Stop Record After setting; if there is no motion, it records at the minimum frame rate
setting. Set the frame rate in (5) Frame Rate.
- No Recording
The system won’t do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is detected. When it
detects a motion, a green triangle mark would appear at the upper left corner of the screen.
(4) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard disk space.
(5) Frame Rate
Set the maximum and minimum number of frames to be recorded during motion and motionless state. The
frame rate ranges from 01 to 30 for NTSC and 01 to 25 for PAL. The higher the frame rate, it uses more hard
disk space.
Always recoding frame rate is depending on value of max frame rate.
(6) Video Size
Select the size of the video and click the  button. The higher the size, the larger the file it create.
(7) Individual Adjustment
Each camera can adjust video size and frame rate individually. Click Default will back to the factory default
value. The frame rate usage is shown in Used and Unused columns by CIF mode.
- Adjusting video size and frame rate by channel, only available on the analog camera.
- EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
EH5216/EH5216H series UI EH5108/EH5108H series UI
(8) Mask
Mark an area on the screen to disregards the motion in the marked area and to only monitor outside the marked
area. Enable the Enable Mask and click-and-drag an area on screen that user wants to mask. To clear all mask
area, click Clear button. To inverse the mask area, click Invert button. The original selected area will
exchanged with un-selected area. To show the mask area on preview screen, enable Show Mask. The mask is
able to see on the screen only when preview screen is in single screen mode