AVer NX8000 - Manual (Page 49)

42
camera on the LAN network. If user is not sure the camera is which model, click
Detect Model
to find the correct model of camera. If it requires user identification,
enable Authentication check box and enter User ID and Password. To enable audio,
click Enable Audio check box. If you are not sure of the Protocol or URL info, please
refer to the IP camera manual or contact your IP camera local distributor.
In Camera Setting interface, click Detail to configure Video, Senor, Relay, and Direct
Link by IE
of the IP camera.
- Video Setting
Select the video size and adjust the Frame Rate, Quality, Bright, Contrast, Hue, and
Saturation of the selected camera.
- Recording Setting
~ Save Original Format: Save the video that is compressed by IP camera’s
compress mode.
9
Only decode key frame for Preview: When selected the Save Original
Format
selection, user can mark Only decode key frame for Preview this
option. When previewing video, DVR system only shows key frame and
one frame per second.
~ Transcode by MPEG4 Encoder: Decoding the video and compress video
again by using MPEG4 encoder.