AVer SF1311H-R - Manual (Page 9)

5
Output of pin 1 and 4 can be used to turn on or off the external device.
 The pin 5 and 6 are connected to RS485 interface.
 Ethernet port: Please use CAT 5 cable to connect the IP Camera to a 100Mbps Fast Ethernet network
switch or hub.
Power LED (orange color): This LED is used to indicate whether DC power is ON or OFF.
LAN LED (green color): This LED will be flashing while camera is accessed by remote client.
 Factory default Reset: This button is hidden in the pinhole. It is used to restore the factory default
settings.
 DC power jack: Connect to the power adaptor that included in the package (12VDC).
Hardware Installation
1. Attach the camera with the stand in the package.
2. Fix the camera to the desired location with the stand.
3.
Connect a CAT 5 cable to the LAN socket located on the camera‟s rear and attach it to the network.
4. Connect the power adaptor to the DC power jack of the camera.
[Note] Use the power adaptor that included in the package (12VDC) and connect it to wall outlet for AC power.