AVer CM3000_Remote_iAlarm - Manual (Page 11)

7
7. To stop receive the alarm from DVR/CMS server, un-mark the Enable check box in Enable
column. To resume the alarm receive processing, mark the Enable check box again.
8. To operate the Remote iAlarm enter, click Run Alarm Center. Please see Chapter 3.3 for detail.
9. To delete the DVR/CMS server, select the DVR/CMS server from the list and click Delete.
10. To modify the DVR/CMS server, select the DVR/CMS server from the list and click Edit. In
Server Setting window, user can change the values as demand.
11. Click Save can save the current configuration of the Remote iAlarm.
12. To check the Remote iAlarm product information, click About.