AVer iMatrix - Manual (Page 17)

14
5. After the Monitor set has been created, select the DVR server. And then the camera channels of
the DVR server will display on the Camera Select window. User can combines different cameras
from different DVR servers as a monitor set. And all camera channels can be selected by
different Monitor set raptly. Click < and > to go back previous and go to next camera screen.
6. User can depend on the monitor size to select the screen type – 4:3 (regular screen monitor) or
16:10 (width screen monitor). The 4:3 and 16:10 screen type support different monitor layout.
7. Select the camera that user wants to add, and then click Add button. To add all the cameras,
click Add All. The selected camera channel will be added to Monitor Layout window. User can
add up to 64 cameras in 4:3 screen type and 80 cameras in 16:10 screen type. To remove the
camera from the Monitor Layout window, select the camera and right-click to select Recover.
To delete all cameras, click Clear All button. User can enter a description for a channel. Click a
camera in Monitor Layout window and enter the description in Camera Description. The
camera description will display on the channel of the monitor screen.
i
User can drag the camera channel to Monitor Layout window without using Add button.
8. In Monitor Layout window, user also can set the channel to receive the alarm events from DVR
server.
„
Matrix: set the selected channel to receive and display the alarm event from selected
DVR servers. Click Setup to select the DVR servers. Enable the Retrieve time to set a
period time (0 ~ 255 sec) for alarm event to display. If the retrieve time doesn’t enable, the
alarm event will display on screen until next alarm event come in.
i
On the DVR site, user need to enable and configure the matrix to send iMatrix
(please refer to Alarm Setting of NV/SA/NX user’s manual).