AVer FC1320-P&PW user manual - Manual (Page 72)

66
Output Setting:
Mode setting:
OnOff Switch: Relay status is based on sensor triggered times.
Time Switch: To restore the original relay status after the interval time.
[Note]GPIO pin define please refer to the part of Front / Back plane & I/O port pin assignment.
Ground (G)
ALARM INPUT:
Normal: 5V (The voltage differential from ALM_IN pin & Ground)
Active: 0V (Short the pin of ALM_IN and Ground pin)
DI
DO
RELAY OUTPUT:
MAX: 50 mA, DV 5V
Ground(G)
Status Information
Click Apply button to save the configuration.
Networking Info: Displays network information of the IP camera.
Product Info
−
Server Name: Assigns a name to the IP camera and the name shows on the IP Installer. Also,
displays the related information of the IP camera. Mark Status Bar to display the Server Name
of IP camera on preview interface.
−
LED indicator: To disable or enable the LED indicator on the IP camera.