B&M 30228 TRANSPAK - Manual (Page 7)

TOOLS REQUIRED FOR TURBO HYDRO 350 TRANSPAK INSTALLATION
TROUBLE SHOOTING GUIDE FOR TURBO HYDRO 350
Speed Handle or Rachet - 3/8" drive
1/2" Socket - 3/8" drive
Large Blade Screwdriver
Small Blade Screwdriver
Small Diameter Awl
Torque Wrench 0-50 ft. lbs.
Torque Wrench 0-250 in. lbs.
File
Vise
Drill
Malfunction
Slips
Overheating/foaming at dipstick tube or
breather
Late hard shifts
Will not shift
Erratic shifting
Pump buzz or whine
No third or reverse
Probable Cause
Low fluid level
Pressure regulator valve assembly improperly installed
Valve body bolts loose
Support plate bolts loose
High fluid level
Cooler plugged
Cooler insufficient
Vacuum line cracked or leaking
Vacuum modulator is faulty
Valve body bolts loose
2-3 shift valve burred or sticking
Kickdown cable misadjusted
Shifter misadjusted
Kickdown cable misadjusted
Low fluid level or high fluid level
Vacuum line cracked or leaking
Valve body bolts loose
#1 check ball in wrong location
Support plate gaskets reversed
Low fluid level
Loose valve body support plate bolts
Middle plate, transfer plate or suppor plate improperly
installed