B&M 30262 SHIFT IMPROVER KIT - Manual

1
Installation Instructions
Shift Impr Shift Impr Shift Impr Shift Impr Shift Impro oo oovvvvver Kit er Kit er Kit er Kit er Kit
Part No. 30262
1968-1981 1968-1981 1968-1981 1968-1981 1968-1981
T T T T TurboHy urboHy urboHy urboHy urboHydr dr dr dr drama ama ama ama amatic 350 tic 350 tic 350 tic 350 tic 350
©B&M Racing and Performance Products 2002
Congratulations! You have just purchased the most
complete and versatile Shift Improver Kit available. We
feel that the installation instructions on the following pages
are as complete and as clear as possible. Installation of
your Shift Improver Kit can be handled by anyone with a
minimum of mechanical experience. It is important to
closely follow the instructions. Read each step and if you
don’t understand go back and read it again.
NOTE: The Shift Improver Kit is not a cure-all for ailing
transmissions. If your transmission is slipping or in poor
general shape, the installation of a Shift Improver Kit may worsen the condition. However, on a good operating
transmission in average condition the Shift Improver will
provide the kind of transmission shift feel you’re looking
for.
Before beginning, check the parts list on Page 8 of
these instructions to make sure you have all the
necessary parts. Also cheek the tool list on Page 5. A
minimum of tools are required.
This kit will not fit a TH-350C transmission. Use
Transpak part number 30235 for 1980-86 TH-350C
9500611-02