B&M 70289 CHROME DEEP PAN - Manual (Page 2)

B&M deep pan and new gasket onto
the transmission. Re-use the original
pan bolts and washers and tighten to
12-13 lbs.ft. Do not overtighten as this
can cause leaks. Make sure that the
drain plug is tight.
STEP 6. Lower the vehicle but try to
keep the rear wheels off of the ground,
if possible. Add 6 quarts of Dexron II or
B&M Trick Shift automatic transmis-
sion fluid.
STEP 7. Start the engine and place
the shifter in the Neutral position. Add
fluid until the oil level is between the
Add and Full marks. Shift the trans-
mission through all gear positions. If
the rear wheels are off the ground allow
the transmission to shift through all
gear positions several times. Place the
selector in Neutral and check the fluid
level. Do not overfill as this will cause
foaming and overheating. Check the oil
pan and gaskets for leaks.
PARTS LIST
B&M Chrome Deep Pan with
drain plug
Oil pan gasket
O-rings (2)
Filter pickup extension
Filter support spring
Filter
support
spring
Place sup-
plied O-rings
(2) on the
extension
here
Lubricate O-rings
with automatic
transmission fluid
Filter tube
with installed
multi-lip seal
This end inserted
into pump
Make sure the extension is
seated all the way into pump
Lubricate multi-lip
seal with trans fluid
Figure 1
Figure 2