B&M 70441 HOLESHOT 2400 User Manual
Torque converter, Installation instructions for
Torque Converter
Installation Instructions for
General Motors TH700-R4 (4L60), 4L60E,
TH200-4R and TH200C
Part Nos. 70415, 70416, 70417, 70418, 70419, 70420, 70422, 70425 , 70426, 70440 & 70441
(C) B&M Racing & Performance Products 1996, 1999, 2004
Fig. 1
9500354-04
Printed in the U.S.A.
Congratulations! You have just pur-
chased the best performing and highest
quality torque converter available. We
have endeavored to make these installa-
tion instructions as clear and complete
as possible. Anyone with a minimum of
mechanical experience should be ca-
pable of installing a torque converter
using proper tools and following the in-
structions. IMPORTANT: Read the in-
structions completely before beginning
the installation so you can familiarize
other changes are made to the vehicle.
Optionally the TCC can be bypassed
(except on 4L60E transmissions) if de-
sired as covered in STEP 22 below.
If the torque converter is being in-
stalled into a vehicle that was not origi-
nally equipped with a transmission with
lockup torque converter the TCC will not
operate and the converter will be a non-
lockup converter. The TCC in a TH700-
R4, 4L60, TH200-4R or TH350C can be
made to operate in this type of applica-
yourself with the procedures.
APPLICATIONS
These GM lockup clutch style (TCC)
torque converters are made in versions
for several automatic transmissions,
three different input shaft spline tooth
numbers and a range of stall speeds.
The chart below shows the applications.
The new B&M torque converter can
be used as either a lockup or non lockup
unit. If the vehicle currently has an opera-
tional TCC it will continue to operate if no
Torque Converter Applications
Transmission
Input Shaft
Type
Part No.
TH200-C
27 Tooth
HoleShot 2400
70415
TH200-4R
27 Tooth
HoleShot 2400
70415
TH700-R4 1982-84
27 Tooth
HoleShot 2400
70415
TH200-C
27 Tooth
HoleShot 2000
70416
TH200-4R
27 Tooth
HoleShot 2000
70416
TH700-R4 1982-84
27 Tooth
HoleShot 2000
70416
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
HoleShot 2000
70417
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
HoleShot 2400
70419
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
Tork Master 2000
70420
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
Tork Master 2400
70418
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
Traveler
70422
TH700-R4 1984-93 (4L60) & 1993-96 4L60E
30 Tooth
HoleShot 3000
70425
TH200-C
27 Tooth
HoleShot 3000
70426
TH200-4R
27 Tooth
HoleShot 3000
70426
TH700-R4 1982-84
27 Tooth
HoleShot 3000
70426
4L60E 1998-04 & 2000-04 4L65E
30 Tooth
HoleShot 2000
70440
4L60E 1998-04 & 2000-04 4L65E
30 Tooth
HoleShot 2400
70441