B&M 80688 CONSOLE QUICKSILVER User Manual
Page 5
Ratchet Shift Mode
Switching to Straight Gate Mode
Cable is routed clear of exhaust system and moving parts.
Shifter is adjusted properly and spring clip is in place on
transmission cable swivel.
The neutral safety switch is connected and functioning
to prevent engine starts in drive gears and reverse.
There is no debris or trash in the shifter mechanism.
Indicator clearly visible.
Knob is tight on shifter handle.
Shifter locks in Park and handle must be lifted to engage
Reverse.
Shifter moves smoothly and freely through all positions
as described in Shifter Operation.
Figure #10
Figure #11
Figure #8
Figure #9
Manual/
Automatic Manual
Pull up firmly
on knob
Indicator shows
gear position
Indicator shows
gear position
Manual/
Automatic
Move shift lever
back and forth
with a firm quick
action. Release
handle to allow it
to return to
center position
Manual
Switching to Straight Gate Mode
Straight Gate Mode
Lift knob to clear stop gates
Manual/
Automatic
Manual
Indicator shows
gear position
Manual/
Automatic
Manual
Indicator shows
gear position
Push down
firmly on knob
5
*NOTE: 3-speed shown. 4-speed action identical with one extra ratchet gate position in Fig #10.