B&M 81002 CONSOLE HAMMER SHIFTER - Manual

I
nstallation Instructions
Console Hammer Shifter
1994-2000 Ford Mustang
Part Number 81001
© B&M Racing & Performance Products LLC 2000
The B&M Mustang Console Ham-
mer shifter is a full ratchet shifter that
is designed to fit 1994 to 2000 Ford
Mustangs with AODE automatic trans-
missions. Unlike other Hammer
shifters, this shifter not only ratchets
between all of the forward gears but
also ratchets into Reverse and Park. It
has a lockout, controlled by the trig-
ger, to keep from unintended shifts into
Reverse or Park. It is designed to work
with the ignition interlock and the brake
interlock installed in these vehicles.
This shifter is designed to work with
the existing Ford shifter cable and the
existing neutral safety switch and
backup light switch.
Please read the instructions and
review the illustrations thoroughly be-
fore beginning the installation.
The mechanical components of this
shifter are precision made and as-
sembled at our factory. Any modifica-
tion or disassembly of these parts can
cause the shifter to malfunction and
will void the warranty. You should dis-
assemble only those items outlined in
the instructions.
IMPORTANT: This shifter is designed
to work with the steering column lock
on your car. Be sure that it is con-
nected to the shifter and properly ad-
justed, so that the steering column
only be locked and the key removed
when the shifter is in Park and so that
the transmission cannot be shifted out
of Park unless the key is turned on.
Some Mustangs are also equipped
with a brake interlock that prevents the
shifter from being shifted out of Park
unless the brakes are applied. If your
vehicle is so equipped, this feature will
also work with the B&M Mustang Con-
sole Hammer shifter. Check to be
certain that the interlock operates cor- rectly with the existing shifter. If it does
not, it probably will not work with the
B&M Mustang Console Hammer
shifter. The interlock should allow you
to turn the key to the locked position
only when the shifter is in Park, and
will not allow you to shift out of Park
unless the key is turned out of the lock
position (and the brakes are applied if
your vehicle also has a brake inter-
lock).
9500670-01 Printed in USA
Photo #1
spring clips (two on
each side)
panel
electrical
connectors