Salter Brecknell PS500 - Manual (Page 17)

Ⅹ.Key Definition summary:
KEY MODE DEFINITION
Normal weighing mode
Enter or exit HOLD mode; output the
data as per P4,P5,P6 setting
Setup mode/Calibration
mode
Shift the flashed position from right to
left HOLD
/PRINT
Displaying A/D code or input
voltage mode
No Function
Normal weighing mode
Choose weight units, refer P8, P9, P10,
P11 setting and Table3,Table4.
Setup mode/Calibration
mode
Change the digit on flashed position and
click this button to add 1.
UNIT
Displaying A/D code or input
voltage mode
Choose the weight inner code or input
working voltage to be displayed.
Normal weighing mode Tare the weight
Setup mode/Calibration
mode
Confirm the displayed parameters or
input data, and go to next step
TARE
Displaying A/D code or input
voltage mode
Choose filtered or un-filtered weight
A/D data
ON/OFF/
ZERO
Normal weighing mode Zero function or Power off the scale.
26
Setup mode/Calibration
mode/Displaying A/D code
or input voltage mode
Exit and back to normal work mode
ON/OFF/
ZERO
+
HOLD
/PRINT
Normal weighing mode
(more than 3s)
Go to Show A/D code or input working
voltage of indicator mode
ON/OFF/
ZERO
+
UNIT
Normal weighing mode
(more than 3s)
Enter setup mode
ON/OFF/
ZERO
+
TARE
Normal weighing mode
(more than 3s)
Enter calibration mode when
Ⅺ.Parameters setting summary: SEE SPECS
Para-
meter
x/xy
Factory
Set
Setting
P1.xy 00-15 05
Auto-off time: no auto-off;
01-15 minutes auto-off time
P2.x 0, 1, 2 2
0=only Hold function; 1=only Print function;
2=Print and Hold function,
P3.xy
0,1,2,
3-50
2
0=no hold function; 1=hold lager weight reading;
2=auto release hold function when weight is below
10d and auto-hold new stable weight (more than
10d); 3-50=unchangeable reading when the variety
is within +3~50d
27