Salter Brecknell 7815 / 7815R - Manual (Page 7)

Model 7815 Parcel Bench Scale User’s Manual 7
Check container for any obvious evidence of
damage. Inspect the unit for shipping damage.
Immediately report any damage to the shipper.
1. Mount the unit on a stable, level surface that
is free from air currents and vibration. Be
sure the weigh platter does not touch any
adjacent surfaces.
2. To install the weigh platter flush with a
countertop, use the dimensions below to
guide your construction.
7815 Platform Minimum Cutout
Dimensions Dimensions
14" W 14.75" W
12.5" D 13.25" D
4.2" Min. Ht.
3. Loosen the collars on the leveling feet. Level
the unit by using the level bubble under the
platter as a guide. Be sure all four feet are in
firm contact with the counter, then tighten all
collars.
4. Make sure all power cords, remote display
cables, etc. are not touching the live weighing
surface.
5. Plug the unit into an appropriate voltage
outlet, properly grounded.
Initial Setup
Installing the Scale
Unpacking the Scale