Salter Brecknell CP130 - Manual (Page 3)

CP130 User Guide Page 3 of 11
2 INTRODUCTION
This document is a User Guide, written for the person connecting and using the CP130 thermal
printer.
Please read this Guide carefully before making any connection.
A separate Programmer Guide provides details of the control codes, and describes the internal
operation of these products.
2.1
NOTES ON PRINTER FIRMWARE REVISIONS (INCLUDING FLASH)
The manufacturer reserves the right to modify and improve the firmware in its printer products at any
time. Whilst every effort is made to ensure backward compatibility, no guarantee in this respect is
given or implied.
The CP130 includes a flash-reprogrammable microcontroller. This allows firmware upgrades under
customer control (including customised fonts, which may be created using the Font Editor Utility).
Refer to the factory for more information in this feature, if required.
2.2
COPYRIGHT NOTICE AND DISCLAIMER
Copyright subsists in the manufacturer’s intellectual property, including controller firmware (embedded
software) and circuit diagrams, pin connection lists and application data. No warranty in respect of
patent rights of the manufacturer or of third parties is given. Unauthorised reproduction or
amendment of controller firmware may result in prosecution.
Fujitsu is a registered mark of its owner Fujitsu Limited. References to this or other owners' marks in
this document are for illustrative purposes only.
The manufacturer does not assume responsibility for interchangeable functionality of other parties'
command sets.
2.3
DOCUMENTATION REVISION HISTORY
Title Rev Issue Date Comments
User Guide to the CP130 1.0 28 Mar 2011 Original release
(Ref xxxxxxxxusg12.pdf)