Brondell Swash 300 - Manual (Page 23)

21
TROUBLESHOOTING
Problem Possible Causes Possible Solutions
1. Bidet not plugged in
2. No power to Swash
3. There is power, but nothing happens
when trying to use the Swash
4. Not activating body sensor
The bidet seat is not working
1. Washing time exceeded the cycle
time
2. Power failure
1. Press the wash button during cycle to
extend the time (see operation section for
more information about wash functions)
2. Check and reset GFI outlet
Nozzles do not function properly
1. Body sensor does not detect that
you are sitting on Swash
Bidet wash feature does not work
or fails to spray
1. Adjust sitting position to fully cover
the body sensor. Overide the body
sensor (refer to special mode operation
section to unlock body seat sensor)
settings
5. Adjust the water pressure settings
on the remote.